Bathtub drains may need to be changed and drains with stoppers that are built in tend to have issues. They will eventually become more difficult to use and eventually let water leak out when it is intended to remain closed and also hold the water even when they are meant to be draining. This is the reason why you are unable to properly wash your ankles while showering in most cases. As time passes, your tub drain stopper mechanism is going to need to be replaced or repaired. This is a relatively simple repair that many DIYers are able and willing to tackle. You’ll need in your possession some plumber’s putty and channel locks (or another wrench) as well as an Philips screwdriver and the part that you will need to replace to the bathtub drain you’re replacing along with some cleaning clothsdrain repair Toronto.
Begin by taking out the drain plug from the bathtub mechanism. It has a face plate inside the tub that includes two screws that attach it onto the bathtub. After you have removed the cover plate, you’ll be able to access the rest of the structure. Just grab it and pull it out from the hole it was placed within.
If you’ve broken pieces , you can choose between two options: If you are able to access the opposite part of your wall, the best option is to take the wet wall panel off and fix the issue within the room, however this is rarely an alternative. Most likely, that you’ll have to extract the broken pieces within a tiny space. A wire piece, or a hanger made of wire, bent into a hook, works very well.
After you have gotten rid of all the old pieces it is just a matter of cleaning up, reassemble, and put them back together. It is often possible to repair this kind of draining system without having to replace any components by cleaning it up and then putting it back together properly.
For drains that require replacement, you must ensure that your new components are exactly the same as the previous ones. Making the switch to different sizes of components when working with plumbing isn’t an ideal idea unless you are averse to having your home flood.
Examine the components and check that the components are in good operating condition. If the stopper is fitted and is able to plug the pipe correctly, it is now time to put in the stopper for bathtub drains. If not, it is important to purchase the proper equipment first.
Plumbers putty is recommended on all pipes and flanges they join to ensure they’re sealed properly. The mechanism that raises or lowers the stopper has to be connected to the plate that is used to overflow. Before sealing the plate down , ensure that the stopper is functioning effectively by conducting a test. If you find that the bathtub is holding water and draining water out at the appropriate times , it is time to close the ple down.
You will need to spread some plumber’s putty onto the plate and then set it in the desired position and secure it by screwing it down. It is then possible to clean any remaining plumber’s glue. Check to see if you’ve blocked the vent for overflow and then you’re done. The drain in your bathtub should function just as well as it did when new.